项目 | 规格参数 | |
输出Output | DC/DC变换器类型Type | 隔离型 |
输出额定功率Rated output power | 1500W | |
峰值输出功率及持续时间Max output power | 1200W@6min | |
输出额定电压Rated output voltage | 14V | |
稳压精度Voltage regulation accuracy | ±140mV | |
效率Efficiency | ≥90% | |
输入Input | 输入电压范围 Range of input voltage | 65-115V/100-200V/200-450V |
欠压保护电压Low-voltage protection | ||
过压保护电压High-voltage protection | ||
环境Environment | 工作噪声Working noise | ≤50dB |
工作环境温度Working temperature | -40~85℃ | |
存储温度Storage temperature | -40~105℃ | |
湿度humidity | 5%~95% | |
IP等级Level of IP | IP67 | |
冷却功能The cooling function | 自冷 | |
保护Protection | 过压保护Over voltage protection | 输入过压,停机输出过压,停机 |
欠压保护Under voltage protection | 输入欠压,停机 | |
输出欠压,不停机 | ||
短路保护Short circuit protection | 输出短路解除后自动恢复 | |
过温保护Over temperature protection | QC/T 413-2002中3.11的规定进行 | |
反接保护Reverse connect protection | 输入反接保护:OK | |
电位均衡和接地保护Equilibrium potential and ground protection | 接地点有明显标志,金属部件与外壳地电阻不大于0.1Ω | |
断电保护Power-off protection | 断电停止工作 | |
安规Safety | 绝缘电阻Insulation resistance | ≥20MΩ |
介电强度dielectricstrength | 2000VDC | |
电气间隙和爬电距离Clearance and Creepage | 2mm/3mm | |
可靠性reliability | 耐振动性能vibration resistance | 经X,Y,Z三个方向扫频震动试验,零部件无损伤,紧固件无松脱现象 |
耐冲击性能impact resistance performance | 参见GB/T15139-1994中6.5的要求 | |
耐工业溶剂性能Industrial solvent resistance | 金属零部件具有良好的防腐蚀层 | |
防盐雾性能Salt fog resistance | 参见GB/T 2423.17 | |
耐久性Durability | 在不低于GB/T 24347-2009相关规定 | |
电磁抗扰性Electromagnetic interference resistance | 满足GB/T17619-1998中第4章的规定 | |
电磁骚扰性Electromagnetic abusive | 参见GB18655-2002中第12章和第14章规定的限值 | |
其他Other | 重量weight | ≤4Kg |
©浙江聚源电子有限公司